KTR-Group BoWex FLE-PA, Инструкция по эксплуатации и сборке

Страница: 2 / 17

BoWex
®
FLE-PA / FLE-PAC
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 40117 EN
2 of 17
3
Please observe protection
note ISO 16016.
Drawn: 2018-09-06 Pz/Hk Replacing: KTR-N dated 2018-08-30
Verified: 2018-09-06 Pz Replaced by:
1 Technical data 3
2 Advice 7
2.1 General advice 7
2.2 Safety and advice symbols 7
2.3 General hazard warnings 7
2.4 Intended use 7
2.5 Coupling selection 8
2.6 Reference to EC Machinery Directive 2006/42/EC 8
3 Storage, transport and packaging 8
3.1 Storage 8
3.2 Transport and packaging 8
4 Assembly 9
4.1 Types of hubs 9
4.2 Components of the couplings 9
4.3 Advice for finish bore 10
4.4 Assembly of hub 11
4.5 Assembly of spline hub 11
4.6 Assembly of clamping hub or clamping hub N 11
4.7 Assembly of the flange 12
4.8 Displacements - alignment of the couplings 13
5 Start-up 15
6 Breakdowns, causes and elimination 16
7 Disposal 17
8 Spares inventory, customer service addresses 17
Table of contents