BoWex
®
FLE-PA / FLE-PAC
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40117 EN
17 of 17
3
Please observe protection
note ISO 16016.
Drawn:
2018-09-06 Pz/Hk
Replacing:
KTR-N dated 2018-08-30
Verified:
2018-09-06 Pz
Replaced by:
Breakdowns
Causes
Elimination
Excessive wear on the spline
of flange
Vibrations of drive
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the flange
3) Inspect coupling components and replace
coupling components that are damaged
4) Insert flange, assemble coupling components
5) Inspect alignment, adjust if necessary
6) Find out the reason for vibrations
Ambient/contact temperatures
which are too high for the nylon
flange, max. permissible
e. g. 130 °C
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the flange
3) Inspect coupling components and replace
coupling components that are damaged
4) Insert flange, assemble coupling components
5) Inspect alignment, adjust if necessary
6) Inspect and adjust ambient/contact temperature
e. g. contact with aggressive
liquids/oils, ozone influence, too
high/low ambient temperatures
etc. causing physical
modification of the flange
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the flange
3) Inspect coupling components and replace
coupling components that are damaged
4) Insert flange, assemble coupling components
5) Inspect alignment, adjust if necessary
6) Make sure that further physical modifications of
the flanges are excluded
In respect of environmental protection we would ask you to dispose of the packaging or products on termination of
their service life in accordance with the legal regulations and standards that apply, respectively.
Metal
Any metal components have to be cleaned and disposed of by scrap metal.
Nylon materials
Nylon materials have to be collected and disposed of by a waste disposal company.
A basic requirement to ensure the readiness for use of the coupling is a stock of the most important spare parts
on site.
Contact addresses of the KTR partners for spare parts and orders can be obtained from the KTR homepage at
www.ktr.com.
KTR does not assume any liability or warranty for the use of spare parts and accessories
which are not provided by KTR and for the damages which may incur as a result.
6
Breakdowns, causes and elimination
7
Disposal
8
Spares inventory, customer service addresses