KTM F7360R6, Руководство пользователя

Страница: 72 / 178

12 SERVICE WORK ON THE CHASSIS
70
E00375-12
–
Position the brake caliper, and mount and tighten screws
9
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Mount the cable tie(s).
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
bk
.
Finishing work
–
Mount the handlebar cushion.
–
Install front fender. ( p. 74)
–
Install the front wheel. ( p. 108)
–
Install the headlight mask with the headlight. ( p. 120)
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check the play of the steering head bearing. ( p. 72)
–
Remove the motorcycle from the lift stand. ( p. 63)
–
Check the headlight setting. ( p. 122)
12.12 Installing the lower triple clamp (All Six Days models)
B01218-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 167)
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Mount protective ring
2
and O-ring
3
.