KTM F7360R6 Скачать руководство пользователя страница 167

Страница: 167 / 178

23 SUBSTANCES

165

Engine oil, 2-stroke

Standard/classification

–

JASO FD (

p. 169)

Guideline

–

Only use high grade 2-stroke engine oil of a reputable brand.

Fully synthetic

Recommended supplier
Motorex

–

Cross Power 2T

Fork oil (SAE 4) (48601166S1)

Standard/classification

–

SAE (

p. 169) (SAE 4)

Guideline

–

Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.

Shock absorber fluid (SAE 2.5) (50180751S1)

Standard/classification

–

SAE (

p. 169) (SAE 2.5)

Guideline

–

Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.

Super unleaded (ROZ 95/RON 95/PON 91)

Standard/classification

–

DIN EN 228 (ROZ 95/RON 95/PON 91)

Guideline

–

Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.

–

Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.

Info

not

use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15,

E25, E85, E100).

Super unleaded (95 octane) mixed with 2-stroke engine oil (1:60)

Standard/classification

–

DIN EN 228

–

JASO FD (

p. 169) (1:60)

Mixture ratio

1:60

Engine oil, 2-stroke (

p. 165)

Super unleaded (ROZ 95/RON 95/PON 91) (

p. 165)

Recommended supplier
Motorex

–

Cross Power 2T

Содержание F7360R6



















































































































































































Результаты поиска

Содержание F7360R6

Отзывы:

KTM F7360R6, Руководство пользователя, Страница: 167 / 178

Результаты поиска

Содержание F7360R6

Отзывы: