KTM F7360R6, Руководство пользователя

Страница: 64 / 178

11 TUNING THE CHASSIS
62
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount screws
1
and
tighten evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm
(14.8 lbf ft)
Info
Make sure the gap widths are even.
M00987-11
(All Six Days models)
–
Remove screws
1
. Take off the handlebar clamps.
Remove the handlebar and lay it to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove screws
2
. Take off the handlebar supports.
–
Place the handlebar supports in the required position.
Mount and tighten screws
2 .
Guideline
Screw, handle-
bar support M10 40 Nm (29.5 lbf ft)
Loctite ® 243™
Info
Position the left and right handlebar supports
evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount screws
1
and
tighten evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm
(14.8 lbf ft)
Info
Make sure the gap widths are even.