KTM F7303R2, Инструкции по установке

Страница: 29 / 45

3 WORK
27
Preparatory work
(All EXC models)
–
Press and hold the kill switch while the engine is idling
until the engine stops.
(250 XC
‑
W TPI US)
–
Press and hold the kill switch while the engine is idling
until the engine stops.
–
Remove the seat. ( p. 19)
F00138-10
Main work
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batter-
ies.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable
materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge
is already below the minimum voltage.
Minimum voltage before
the start of the charge
9 V
–
Dispose of batteries with less than the minimum
voltage correctly.
–
Disconnect negative cable
1
from the battery.
–
Pull back positive terminal cover
2
and disconnect the posi-
tive cable from the battery.
–
Remove screw
3
.
–
Pull holding bracket
4
forward and remove battery toward
the top.
3.12 Recharging the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.