KTM F7303R2, Инструкции по установке, Страница: 5 / 45

2 SETUP
3
2.1 Unpacking and setting up the vehicle
E00851-10
Condition
Packaging
V2
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over. To avoid damaging the motorcycle during the
setup, leave the protective film on the vehicle until
you have finished.
–
Remove the separate enclosure and unpack it. Check that
the scope of supply is complete using the enclosed pack-
ing list.
–
Have a lift stand available.
Lift stand (78129955100)
–
Carefully loosen and remove the tension belt of the footrest
mount.
Info
An assistant prevents the motorcycle from falling
over.
402050-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
–
Remove the headlight mask with the headlight. ( p. 30)
H02474-10
(All EXC models)
–
Position the turn signal indicator lamp 1 in the com-
bination instrument bracket.
E00850-10
Condition
Packaging V12
–
Remove the box and the plastic packaging.