KTM F7303R2, Инструкции по установке, Страница: 6 / 45

2 SETUP
4
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
have finished.
–
Remove and unpack the separate enclosure and attach-
ments. Check that the scope of supply is complete using
the enclosed packing list.
–
Have a lift stand available.
Lift stand (78129955100)
–
Remove the two cable ties on the triple clamp.
402051-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle and attachments for transport damage.
–
Install the shock absorber. ( p. 24)
H02474-10
(All EXC models)
–
Position the turn signal indicator lamp
1
in the com-
bination instrument bracket.
H02537-10
(All EXC models)
–
Position the connector retainer and combination instru-
ment on the upper triple clamp.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm
(7.4 lbf ft)
H02538-10
(250 XC
‑
W TPI US)
–
Position the combination instrument on the upper
triple clamp.
–
Mount and tighten screws
2
with the collar bushings.
Guideline
Remaining screws,
chassis M6 10 Nm
(7.4 lbf ft)