6
FORK, TRIPLE CLAMP
25
201485-10
–
Clamp the tap compression in a bench vise using soft jaws.
–
Mount shim stack
2
.
Info
Mount the smaller shims below.
–
Mount pistons
3
with O-ring.
Info
The side with the largest inside diameter faces upward.
–
Grease the piston O-ring.
Fork oil (SAE 4) (48601166S1) (
p. 211)
201486-10
–
Mount washer
4
.
–
Mount spring
5
with the tighter coil facing downward.
–
Mount and tighten the nut
6
.
Guideline
Tap compression nut
M6x0.5
3 Nm (2.2 lbf ft)
Info
Washer
4
must be free to move against the spring force.
–
Lock the nut using a punch.
–
Extract the tap compression.
6.15
Assembling the cartridge
Info
The steps are identical for both fork legs.
200715-10
–
Clamp in the piston rod.
Clamping stand (T14016S) (
p. 224)
–
Mount valve
1
of the rebound damping, with the spring and O-ring.
–
Lubricate the O-ring.
Lubricant (T158) (
p. 212)
–
Mount spring
2
.
200718-10
–
Grease the O-ring of tap rebound
3
.
Lubricant (T158) (
p. 212)
–
Mount and tighten the tap rebound.
Guideline
Tap rebound
M9x1
18 Nm
(13.3 lbf ft)
Loctite
®
2701
–
Position spring
4
.
200719-10
–
Mount shim stack
5
.
Info
Mount the smaller shims below.
–
Press the shim stack downward against the spring force.
Info
The shim stack must be pressed downward over the collar.
Содержание 690 Enduro R 2013
