6
FORK, TRIPLE CLAMP
16
202027-10
–
Remove screws
8
. Remove the fork protector from above.
6.8
Installing the fork legs
202027-11
–
Slide on the fork protector from above and position it. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
202028-10
–
Slide the fork legs into the triple clamps on both sides.
Info
The bleeder screws must face forwards.
The second groove
A
of the fork leg must be flush with the upper edge of
the upper triple clamp.
The upper fork overhang must be the same on both sides.
–
Tighten screws
2
on both sides.
Guideline
Screw, top triple clamp
M8
17 Nm
(12.5 lbf ft)
Screw, bottom triple clamp
M8
12 Nm (8.9 lbf ft)
202025-11
–
Position the wheel speed sensor. Mount and tighten screws
3
.
Guideline
Screw, wheel speed sensor M4
1 Nm
(0.7 lbf ft)
Loctite
®
243™
–
Secure the cable with cable binders
4
.
202024-11
–
Position the brake line, wiring harness, and clamp.
–
Mount and tighten screws
5
.
Содержание 690 Enduro R 2013
