17
ENGINE
107
202081-10
Main work
–
Position the engine in the frame.
202080-11
–
Mount swingarm pivot
1
.
–
Mount the screw of the swingarm pivot but do not tighten yet.
–
Mount screw connection
2
of the lower engine attachment but do not tighten yet.
202079-10
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (
p. 221)
202077-11
–
Position the engine bearer.
–
Mount and tighten screws
3
.
Guideline
Screw, engine bearer on frame
M10
45 Nm
(33.2 lbf ft)
–
Mount and tighten screw
4
with nut.
Guideline
Engine carrying screw
M10
45 Nm
(33.2 lbf ft)
Loctite
®
243™
–
Tighten the swingarm pivot.
Guideline
Screw, swingarm pivot
M12
80 Nm (59 lbf ft)
–
Tighten the lower engine bracket.
Guideline
Engine carrying screw
M10
45 Nm
(33.2 lbf ft)
Loctite
®
243™
202078-11
–
Position the line with the oil pressure sensor. Mount and tighten connection
5
.
Guideline
Oil pressure sensor line
M10x1
10 Nm (7.4 lbf ft)
–
Position the clamp of the oil line. Mount and tighten screw
6
. Plug in the connec-
tor.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
Содержание 690 Enduro R 2013
