KTM 690 DUKE MAL Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 197

KTM 690 DUKE MAL Скачать руководство пользователя страница 95

12

BRAKE SYSTEM

93

602575-10

(Duke R)

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

–

Check the brake fluid level in the viewer.
» If the brake fluid has dropped below marking

A

:

–

Add front brake fluid.

x

12.5

Adding front brake fluid

x

Warning

Danger of accidents

Brake system failure.

–

If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized KTM workshop will be glad to help.)

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

«
...
93
94
95
96
97
...
»

Содержание 690 DUKE MAL






































































































































































































Отзывы:

Нет отзывов