KTM 690 DUKE MAL Скачать руководство пользователя страница 83

Страница: 83 / 197

SERVICE WORK ON THE CHASSIS

11.10

Cleaning the chain

Warning

Danger of accidents

Oil or grease on the tires reduces their grip.

–

Remove oil and grease with a suitable cleaning material.

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

The service life of the chain depends largely on its maintenance.

400725-01

–

Clean the chain regularly.

–

Rinse off loose dirt with a soft jet of water.

–

Remove old grease remains with chain cleaner.

Chain cleaner (

p. 187)

–

After drying, apply chain spray.

Chain lube for road use (

p. 187)

Содержание 690 DUKE MAL






































































































































































































Результаты поиска

Содержание 690 DUKE MAL

Отзывы:

KTM 690 DUKE MAL, Руководство пользователя, Страница: 83 / 197

Результаты поиска

Содержание 690 DUKE MAL

Отзывы: