KTM 690 DUKE MAL Скачать руководство пользователя страница 141 | Manualshive

Страница: 141 / 197

KTM 690 DUKE MAL Скачать руководство пользователя страница 141

15

COOLING SYSTEM

139

Info

Do not start up the motorcycle!

–

Fill/bleed the cooling system.

15.4

Draining the coolant

x

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

Warning

Danger of poisoning

Coolant is poisonous and a health hazard.

–

Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.

Condition

The engine is cold.

«
...
139
140
141
142
143
...
»

Содержание 690 DUKE MAL






































































































































































































Отзывы:

Нет отзывов