KTM 690 DUKE MAL Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 197

KTM 690 DUKE MAL Скачать руководство пользователя страница 104

12

BRAKE SYSTEM

102

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.

Preparatory work

–

Check the rear brake linings. (

B00952-10

Main work

–

Stand the vehicle upright.

–

Remove screw cap

1

with the washer and membrane

2

.

–

Add brake fluid to the

MAX

mark.

Brake fluid DOT 4 / DOT 5.1 (

–

Mount the screw cap with the washer and membrane.

Info

Clean up overflowed or spilt brake fluid immediately with water.

«
...
102
103
104
105
106
...
»

Содержание 690 DUKE MAL






































































































































































































Отзывы:

Нет отзывов