KTM 690 DUKE MAL Скачать руководство пользователя страница 113

Страница: 113 / 197

WHEELS, TIRES

111

602567-10

–

Engage the counter bearing of the brake caliper support

and swingarm. Carefully lift

the rear wheel into the swingarm and engage the brake disc. Lay the chain on the rear
sprocket and mount the wheel spindle.

–

Mount chain adjuster

and nut

Info

Mount the left and right chain adjusters in the same position.

–

Push the rear wheel forward so that the chain adjusters are in contact with the adjust-
ing screws, and tighten the nut.
Guideline

In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks

Nut, rear wheel spindle

M25x1.5

90 Nm
(66.4 lbf ft)

–

Insert wheel speed sensor

into the hole. Mount and tighten screw

Guideline

Remaining screws, chassis

10 Nm (7.4 lbf ft)

–

Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.

Finishing work

–

Take the motorcycle off of the rear wheel stand. (

p. 76)

–

Check the chain tension. (

p. 82)

Содержание 690 DUKE MAL






































































































































































































Результаты поиска

Содержание 690 DUKE MAL

Отзывы:

KTM 690 DUKE MAL, Руководство пользователя, Страница: 113 / 197

Результаты поиска

Содержание 690 DUKE MAL

Отзывы: