KTM 690 DUKE MAL Скачать руководство пользователя страница 143

Страница: 143 / 197

COOLING SYSTEM

141

B00985-10

–

Remove bleeder screw

–

Tilt the vehicle slightly to the right.

–

Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten bleeder screw

immediately.

Alternative 1

Coolant (

p. 183)

Alternative 2

Coolant (mixed ready to use) (

p. 183)

–

Fill the radiator completely with coolant. Mount radiator cap

–

Lean the vehicle on the side stand.

–

Check the coolant level in the compensating tank. (

p. 137)

Danger

Danger of poisoning

Exhaust gases are toxic and inhaling them may result in

unconsciousness and/or death.

–

When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.

–

Start the engine and run it until the 5th bar of the temperature indicator lights up.

–

Stop the engine and allow it to cool down.

–

When the engine is cool, check the coolant level in the radiator and, if necessary, add
coolant.

–

Check the coolant level in the compensating tank. (

p. 137)

Содержание 690 DUKE MAL






































































































































































































Результаты поиска

Содержание 690 DUKE MAL

Отзывы:

KTM 690 DUKE MAL, Руководство пользователя, Страница: 143 / 197

Результаты поиска

Содержание 690 DUKE MAL

Отзывы: