KTM 500 EXC-F 2022 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 44

KTM 500 EXC-F 2022 Скачать руководство пользователя страница 32

3 WORK

30

Note

Environmental hazard

12 V batteries contain environmentally hazardous materials.

–

Do not dispose of 12 V batteries as household waste.

–

Dispose of 12 V batteries at a collection point for used batteries.

Note

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.

Info

Even when there is no load on the 12-V battery, it discharges steadily each day.
The charging level and the method of charging are very important for the service life of the 12-V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, and charging time are exceeded, the 12-V battery will be
destroyed.
If the 12-V battery is depleted from starting the vehicle repeatedly, the battery must be charged immedi-
ately.
If the 12-V battery is left in a discharged state for an extended period, it will become deeply discharged
and suffer a loss of capacity, destroying the battery.
The 12-V battery is maintenance-free.

Preparatory work

–

Remove the seat. (

–

Disconnect the negative cable of the 12-V battery. (

311910-10

Main work

–

Connect a battery charger to the 12-V battery. Adjust the bat-
tery charger.

EU battery charger

XCharge

‑

professional

(00029095050)

Alternative 1

US battery charger

XCharge

‑

professional

(00029095051)

Alternative 2

UK battery charger

XCharge

‑

professional

(00029095052)

Info

Follow the instructions of the charger and the manual.

–

Disconnect the battery charger after charging the 12-V battery.
Guideline

The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used

3 months

Finishing work

–

Connect the negative cable of the 12-V battery. (

–

Mount the seat. (

«
...
30
31
32
33
34
...
»

Содержание 500 EXC-F 2022













































Отзывы:

Нет отзывов