KTM 500 EXC-F 2022, Инструкции по установке, Страница: 7 / 44

SETUP 2
5
402051-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle and components for transport damage.
Info
The procedure in the event of transport damage is
described in the Customer Service Manual.
–
Install the shock absorber. ( p. 22)
H01768-10
–
Position turn signal indicator lamp
1
in the combination
instrument rack.
402736-10
–
Position the connector board and combination instrument
on the upper triple clamp.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Route the clutch line with the clutch master cylinder
toward the front between the upper and lower triple
clamps.
–
Install the fork legs. ( p. 22)
S01414-10
(EXC
‑
F EU/US, XCF
‑
W)
–
Remove screws
3
and take off the handlebar supports.
–
Move the handlebar supports to the desired position and
mount and tighten screws
3
.
Guideline
Screw, handle-
bar holder M10 40 Nm (29.5 lbf ft)
Loctite ® 243™
Info
Position the left and right handlebar supports
evenly.