KTM 2015 450 Rally Factory Replica, Руководство пользователя

Страница: 37 / 133

10 SERVICE SCHEDULE
35
10.1 Service schedule
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours/after every race
Once after 1 operating hour
Read out the fault memory using the KTM diagnostics tool.
○ ● ● ●
Check that the electrical equipment is functioning properly.
○ ● ● ●
Check and charge the battery.
● ● ●
Check the front brake linings. ( p. 71)
● ● ●
Check the rear brake linings. ( p. 75)
● ● ●
Check the brake discs. ( p. 69)
● ● ●
Check the brake lines for damage and leakage.
● ● ●
Check the rear brake fluid level. ( p. 74)
● ● ●
Check the free travel of the foot brake lever. ( p. 73)
● ● ●
Check the frame and swingarm.
● ● ●
Check the swingarm bearing.
●
Check the heim joints at the top of the shock absorber.
● ● ●
Check the shock absorber linkage.
● ● ●
Conduct a minor fork service.
● ● ●
Conduct a major fork service.
●
Check the tire condition. ( p. 81)
○ ● ● ●
Check the tire air pressure. ( p. 82)
○ ● ● ●
Check the wheel bearing for play.
● ● ●
Check the wheel hubs.
● ● ●
Check the rim run-out.
○ ● ● ●
Check the spoke tension. ( p. 82)
○ ● ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 62)
● ● ●
Check the chain tension. ( p. 61)
○ ● ● ●
Lubricate all moving parts (e.g., hand lever, chain, ...) and check for smooth operation.
● ● ●
Check/rectify the fluid level of the hydraulic clutch. ( p. 65)
● ● ●
Check the front brake fluid level. ( p. 70)
● ● ●
Check the free travel on the hand brake lever. ( p. 69)
● ● ●
Check the steering head bearing play. ( p. 49)
○ ● ● ●
Check the valve clearance.
○ ●
Check the clutch and damping elements in the clutch basket.
● ● ●
Change the engine oil and oil filter and clean the oil screens. ( p. 92)
○ ● ● ●
Change the absorbing elements in the outer clutch hub.
● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect rout-
ing.
○ ● ● ●
Check the antifreeze and coolant level. ( p. 88)
○ ● ● ●
Check the cables for damage and routing without sharp bends.
● ● ●
Check that the cables are undamaged, routed without sharp bends and set correctly.
○ ● ● ●
Clean the air filter and air filter box.
● ● ●
Clean the fuel filter of the fuel tank.
●
Change the glass fiber yarn filling of the main silencer. ( p. 57)
● ● ●
Check the screws and nuts for tightness.
○ ● ● ●
Check the fuel pressure.
● ● ●
Adjust the idle speed. ( p. 91)
○ ● ● ●
Check that the radiator fan is functioning properly.
● ● ●
Final check: Check the vehicle for roadworthiness and take a test ride.
○ ● ● ●
Read out the error memory after the test ride using the KTM diagnostics tool.
○ ● ● ●
Make the service entry in KTM Dealer.net and in the service record.
○ ● ● ●