KTM 2015 450 Rally Factory Replica Скачать руководство пользователя страница 20

Страница: 20 / 133

CONTROLS

6.17

Side stand

401943-10

The side stand



is on the left side of the vehicle.

401944-10

The side stand is used to park the motorcycle.

Info

When you are riding, the side stand



must be folded up and secured with the

rubber band



6.18

Steering lock

L02717-10

The steering lock



is fitted on the left of the steering head.

The steering lock is used to lock the steering. Steering, and therefore riding, is no
longer possible.

6.19

Locking the steering

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

400732-01

–

Park the vehicle.

–

Turn the handlebar as far as possible to the right.

–

Insert the key in the steering lock, turn it to the left, press it in, and turn it to the
right. Remove the key.

Steering is no longer possible.

Info

Never leave the key in the steering lock.

Содержание 2015 450 Rally Factory Replica






































































































































Результаты поиска

Содержание 2015 450 Rally Factory Replica

Отзывы:

KTM 2015 450 Rally Factory Replica, Руководство пользователя, Страница: 20 / 133

Результаты поиска

Содержание 2015 450 Rally Factory Replica

Отзывы: