KTM 2015 450 Rally Factory Replica, Руководство пользователя, Страница: 41 / 133

11 TUNING THE CHASSIS
39
400988-10
Main work
–
Measure the vertical distance between the rear axle and a fixed point such as a
marking on the side cover.
–
Note down the value as dimension

.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 44)
11.7 Checking the static sag of the shock absorber
Condition
The fuel tanks are half full.
400989-10
–
Measure distance

of rear wheel unloaded. ( p. 38)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point again.
–
Note down the value as dimension

.
Info
The static sag is the difference between measurements

and

.
–
Check the static sag.
Static sag 35 mm (1.38 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. ( p. 40)
11.8 Checking the riding sag of the shock absorber
Condition
The fuel tanks are half full.
400990-10
–
Measure distance

of rear wheel unloaded. ( p. 38)
–
With another person holding the motorcycle, the rider, wearing full protective cloth-
ing, sits on the seat in a normal sitting position (feet on footrests) and bounces up
and down a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and a fixed point.
–
Note down the value as dimension  .
Info
The riding sag is the difference between measurements

and

.
–
Check the riding sag.
Riding sag 100 mm (3.94 in)
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag. ( p. 40)