KTM 2015 450 Rally Factory Replica, Руководство пользователя, Страница: 42 / 133

11 TUNING THE CHASSIS
40
11.9 Adjusting the spring preload of the shock absorber
Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 44)
–
Remove the seat. ( p. 54)
–
Remove the main silencer. ( p. 56)
–
Remove the shock absorber. ( p. 51)
–
After removing the shock absorber, clean it thoroughly.
402405-10
Main work
–
Loosen screw

.
–
Turn adjusting ring

until the spring is no longer under tension.
Hook wrench (T106S)
–
Measure the overall spring length when not under tension.
–
Tighten the spring by turning adjusting ring

to measurement

.
Guideline
Spring preload
Standard 12 mm
Info
Depending on the static sag and/or the riding sag, it may be necessary to
increase or decrease the spring preload.
–
Tighten screw

.
Guideline
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
Finishing work
–
Install the shock absorber. ( p. 52)
–
Install the main silencer. ( p. 56)
–
Mount the seat. ( p. 55)
–
Remove the motorcycle from the lift stand. ( p. 44)
11.10 Adjusting the riding sag
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 44)
–
Remove the seat. ( p. 54)
–
Remove the main silencer. ( p. 56)
–
Remove the shock absorber. ( p. 51)
–
After removing the shock absorber, clean it thoroughly.
B00292-10
Main work
–
Choose and mount a suitable spring.