KTM 1190 RC8 R Track, Руководство пользователя

Страница: 90 / 127

SERVICE WORK ON THE ENGINE
88
–
Remove the exhaust cover. ( p. 58)
101219-10
–
Park the motorcycle on a level surface.
–
Place a suitable container under the engine.
–
Remove oil drain plug

with the magnet, O-rings, and oil screen.
–
Remove the oil filter.
x
( p. 88)
–
Completely drain the engine oil.
700292-11
–
Thoroughly clean magnet

and oil screen

of the oil drain plug.
101219-11
–
Mount and tighten the oil drain plugs with the magnet, O-rings, and oil screen.
Guideline
Oil drain plug M20x1.5 20 Nm
(14.8 lbf ft)
–
Install the oil filter.
x
( p. 89)
–
Install the exhaust cover. ( p. 58)
–
Install the right side cover. ( p. 57)
–
Install the left side cover. ( p. 57)
16.4
Removing the oil filter
x
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Place a suitable container under the engine.
101220-10
–
Remove screws

. Take off oil filter cover

with the O-ring.