KTM 1190 RC8 R Track, Руководство пользователя

Страница: 34 / 127

CONTROLS
32
–
Set the minutes with the button or the button.
–
Press the MODE button briefly.
The settings are stored and the display changes to the SET
‑
UP menu.
–
Press the button briefly and repeatedly until the symbol shows EXIT SETUP in
the info display.
–
Press the MODE button briefly.
5.44
Adjusting shift speed RPM1/2
Condition
The ignition is on.
The motorcycle is stationary.
400460-01
–
Press the button and the button for 3 - 5 seconds.
–
Press the button twice until the symbol appears in front of SETTINGS in the
info display.
–
Press the MODE button briefly.
–
Press the MODE button briefly.
RPM1 and RPM2 appear in the info display.
The engine speed after RPM1 flashes.
Info
The engine speed can be set at intervals of 50.
RPM1 is the engine speed above which the shift warning light starts to flash.
–
Set the engine speed with the button or the button .
–
Press the MODE button briefly.
The engine speed after RPM2 flashes.
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. If RPM1 = RPM2 , the shift warning light lights up constantly when
you reach the engine speed set.
–
Set the engine speed with the button or the button .
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
Info
At delivery, RPM1 is set to 10000 and RPM2 to 10500.
–
Press the button briefly and repeatedly until the symbol shows BACK... in the
info display.
–
Press the MODE button briefly.
–
Press the button briefly and repeatedly until the symbol shows EXIT SETUP in
the info display.
–
Press the MODE button briefly.
5.45
Setting the blank time of the LAP button LAP BLANK TIME
Condition
The ignition is on.
The motorcycle is stationary.
400461-01
–
Press the button and the button for 3 - 5 seconds.
–
Press the button twice until the symbol appears in front of SETTINGS in the
info display.
–
Press the MODE button briefly.
–
Press the button once until the symbol shows LAP BLANK T in the info display.
–
Press the MODE button briefly.
LAP BLANK T. appears in the info display.
Info
At delivery, LAP BLANK T. is set to 1 second.