KTM 1190 RC8 R Track, Руководство пользователя

Страница: 86 / 127

TUNING THE ENGINE
84
Possible states
0 0 0 A A
0 0 D D
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 C C
0 0 B B
y y
x x
401212-10

Shift lever in neutral position
I Ignition circuit is interrupted
–
Green LED goes out, red LED lights up
x Ignition interruption until shift begin
–
Range should be as small as possible but must not overlap

Shift process in transmission begins
–
Resistance in shift lever increases

Shift process in transmission ended
–
Resistance in shift lever decreases
y Shift end until ignition circuit closed
–
Range should be as small as possible but must not overlap
II Ignition circuit is closed
–
Red LED goes out, green LED lights up

Shift lever at end stop
601414-10
With the quick shifter, it is not necessary to activate the clutch when upshifting gears
from the 1st to the 6th gear.
The ignition is briefly interrupted by the control unit during a shift procedure.
To simplify adjustment of the quick shifter, it is equipped with two LEDs.
The green LED lights up when the ignition is not interrupted.
The red LED lights up when the ignition is interrupted.
The time span of the ignition interruption must be matched to the vehicle.
Info
It is always possible to shift by conventional means using the clutch and throt-
tle.
15.4
Checking/tuning the position of the quick shifter
x
Info
The quick shifter only operates when upshifting gears from 1st to 6th gear.
If the ignition circuit is interrupted too late, upshifting under full throttle is difficult or not possible at all. If it is interrupted to
early, the ignition circuit may be interrupted unintentionally (e. g. due to shift lever vibrations).
If the ignition circuit is closed too early, the shift procedure in the transmission cannot be completed correctly.