KTM 1190 RC8 R Track, Руководство пользователя

Страница: 91 / 127

SERVICE WORK ON THE ENGINE
89
101221-10
–
Pull oil filter

out of the oil filter housing.
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Clean the parts and the sealing area thoroughly.
16.5
Installing the oil filter
x
101222-10
–
Insert oil filter

.
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover

.
–
Mount and tighten the screws.
Guideline
Remaining engine screws M5 6 Nm (4.4 lbf ft)
16.6
Filling up with engine oil
x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
101216-10
–
The oil must be added in two steps.
Engine oil 3.60 l (3.8 qt.) External tem-
perature:
≥
0 °C
(
≥
32 °F)
Engine oil
(SAE 10W/50)
( p. 118)
External tem-
perature: < 0 °C
(< 32 °F) Engine oil
(SAE 5W/40)
( p. 118)
–
Remove screw

and add engine oil.
Engine oil (1st
quantity) 3.00 l (3.17 qt.) External tem-
perature:
≥
0 °C
(
≥
32 °F)
Engine oil
(SAE 10W/50)
( p. 118)
External tem-
perature: < 0 °C
(< 32 °F) Engine oil
(SAE 5W/40)
( p. 118)
–
Mount screw

.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Remove screw

and pour in the remaining engine oil.
Engine oil (2nd
quantity) 0.60 l (0.63 qt.) External tem-
perature:
≥
0 °C
(
≥
32 °F)
Engine oil
(SAE 10W/50)
( p. 118)
External tem-
perature: < 0 °C
(< 32 °F) Engine oil
(SAE 5W/40)
( p. 118)