3. Program and Operation
3.11 Alarm Menu
▲
/
▼
: move joystick up and down for selecting an item.
◀
/
▶
: move joystick left and right for moving an item.
▶
/ [Open] / [Near]: move joystick right to select or save settings or go to edit pages.
▶
/ [Close] / [Far]: move joystick to cancel or to exit current menu (Back).
- Enter into {Main Menu}
- Using the joystick [
▶
], select Alarm Input type (NO / NC).
- Using the joystick [
▶
], select Alarm Output (On / Off)
- Alarm priority can be set using the joystick [
▶
],
Change an action / number {Off, Preset, Pattern, Scan, or Tour}.
- Set Alarm action time (Dwell Time): 3~60sec / On, default setting is ‘ON’.
-> Time Out (3~60sec): This is activated during a period of a selected dwell
time when an alarm is triggered.
-> Momentary (On): When an alarm is triggered, the dome camera will
maintain alarm activation continuously, until it is stopped manually
(96+preset or / and changing in alarm menu).
- It is possible to clear saved {Alarm No.xxx}, pressing [Wide] button at a position of
{No.xxx} individually.
- Press [Open] button or use joystick [
▶
] to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
* Notice
:
In order to call an action (Preset, Pattern, Tour or Scan), you must save Preset, Pattern, Tour, or
Scan first.
To pause alarming (about 10sec) temporarily, press [ESC] button or [96+preset].
* Notice
:
The dome camera normally supports 4 Alarm Input (AL0~3). But AL3 can be used as Digital input
for External D/N, so, in this case, Only AL0~2 are available for Alarm inputs.
31
ALARM SETUP
NO. 001
: NOT USED
IN
:
OUT
:
PRIORITY :
ACTION
:
NUMBER
:
DTIME
:
SAVE : OPEN
BACK : CLOSE
- SET/CLEAR : (TELE/WIDE)
