3. Program and Operation
3.5.4 Day & Night Setup
The Day & Night function improves the camera’s
sensitivity at night or when the brightness level of the
ambient environment. According to the luminance level,
Day & Night filter is automatically switched.
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Day / Night Setup}
using joystick [
▶]
.
- Set Day / Night for Auto, Day or Night.
- Set D&N Detector for Sensor, Video or EXT.
- Set switching time that you want.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back)
* Notice
:
If you connect Digital Input signal (High or Low) to the terminal of AL3 and set EXT in this menu,
you can use EXT D/N instead of Alarm Input. [Refer to 3.11 Alarm Menu]
3.5.5 Advanced Setup
Sharpness enhances picture detail by increasing the
aperture gain of the camera and sharpening the edges in
the picture.
When both high-brightness subjects and low-brightness
subjects have been shot at the same time, overexposure
in the high-brightness subjects or loss of dark detail in the
low-brightness subjects may occur.
The WDR (Wide Dynamic Range) function creates images
free from over-exposure or loss of dark detail by combining
two images after tripping the shutter for a long exposure time
and for a short exposure time in one field.(One mode can be
selected from BLC /WDR / HSBLC / DNR)
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Advanced} using joystick [
▶
].
- Set WDR for On / Off and a level in ‘On’ mode.
- Set other mode for On / Off and a level in ‘On’ mode in the same way.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
24
ADVANCED SETUP
SHARPNESS : 50
BLC LEVEL : OFF
WDR LEVEL : OFF
HSBLC LEVEL : OFF
DNR LEVEL : OFF
SAVE : OPEN
BACK : CLOSE
D/N SETUP
DAY/NIGHT : AUTO
D/N DETECT: VIDEO
D/N DTIME : 03
SAVE : OPEN
BACK : CLOSE
