background image

3. Program and Operation 

3.5.2 WB Setup (White Balance Setup) 

This feature automatically processes the viewed image to retain color balance over a color 

temperature range. 

In Manual mode, you can change the R or B gain value to adjust the color on a monitor.

* Auto Trace White balance (ATW): It aligns the white balance automatically. (2,300 to 11,000 K) 

* Indoor : 3200K Base Mode. Red and Blue gain value can be set by user, 0~255.

* Outdoor : 5400K Base Mode. Red and Blue gain value can be set by user, 0~255.

* Push WB mode: The white balance is aligned during key input. (White balance push auto key) 

* Auto White Balance mode (AWB): Wide range auto white balance mode. In this mode, the white balance is   

   performed at a faster operating speed than ATW. 

- Enter into {Main Manu} 

- Select {Camera Setup} and move to {WB Setup} using joystick[

].

- Set WB mode for ATW, Indoor, Outdoor, Onepush or AWB. 

- Press [Open] button or use joystick to save settings.

- Press [Close] button or use joystick to return to previous menu (Back). 

3.5.3 AE Setup (Auto Exposure Setup) 

Sharpness enhances picture detail by increasing the 

aperture gain of the camera and sharpening the edges 

in the picture.

When both high-brightness subjects and low-brightness 

subjects have been shot at the same time, overexposure 

in the high-brightness subjects or loss of dark detail in the 

low-brightness subjects may occur. 

The WDR (Wide Dynamic Range) function creates images 

free from overexposure or loss of dark detail by combining 

two images after tripping the shutter for a long exposure time and for a short exposure time in 

one field.(One mode can be selected from BLC / WDR / HSBLC / DNR)

- Enter into {Main Manu}.

- Select {Camera Setup} and move to {AE Setup} using joystick[

].

- Set AE mode for Full Auto, Manual, Shutter PRI.

- Press [Open] button or use joystick to save settings.

- Press [Close] button or use joystick to return to previous menu (Back).

AE Mode

Full Auto

Manual

SHUT FIX

Shutter(Auto, X2 ~ X64, 1/30(1/25)~1/10000)

X

O (Auto)

O (Auto)

AGC Gain(OFF, Low / Mid / High)

X

O (Mid)

X

DSS(OFF, X2 ~ X64)

O (x2)

X

X

Bright(0~100)

O (30)

O (30)

O (30)

23

AE SETUP

MODE : FULL AUTO

SHUT :

AGC GAIN :

MAX DSS : OFF

BRIGHT : 030

SAVE : OPEN

BACK : CLOSE

WB SETUP

MODE 

: AWB

R GAIN 

:

B GAIN 

:

SAVE 

: OPEN

BACK 

: CLOSE

Содержание KPC-SPDN120HD





































Отзывы: