3. Program and Operation
3.6.2 Motion Setup
Proportional Pan / Tilt is possible to set manual speed with Zoom
- Use the joystick [
▶
] to select On/Off
Auto-Flip is a function automatically reversing the image when zoom module camera passes
through the top of tilt direction (90 degree)
When tilt angle arrives at the top of tilt orbit (90degree), zoom camera module keep moving to
opposite direction of tilt to keep tracking targets. As soon as zoom camera module passes through
the top of tilt direction (90degree), image should be reversed automatically.
- Use the joystick [
▶
] to select On / Off
Over-Tilt is for restricting vertical view angle related to the operation range of IR sensor and some
blocking view angle mechanically.
To prevent horizontal view cut with tilt angle(with window bubble), it is to restrict vertical view
angle in each mode.
- Use the joystick [
▶
] to select Mode 0 / Mode 1 / Mode 2
3.6.3 Home Action Setup
Home Action can be set so that the dome automatically goes to a preset, a tour or auto scan after
the joystick control has been idle for some amount of time.
The dwell time can be set from 1 minute to 60 minutes.
- Using the joystick [
▶
], {Home Action} can be selected to Home, Preset, Scan and Tour.
- {Number} is the number of {Action}. For example, {Action: Preset/Number: 001} mean Preset [1]
- Set {Time} xx min using the joystick [
▶
].
- Using the joystick
[▶
] to select Auto(On) / Manual (Off).
- If you want to do the funtion in excuting preset, you can set enable.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu {Dome Motion Setup} (Back).
* Note
:
In order to call an action (Preset, Pattern, Tour or Scan), you must save Preset, Pattern, Tour,
or Scan first.
26
MOTION SETUP
PROP. PAN/TILT : ON
AUTO FILP : ON
OVER TILT : MODE 1
SAVE : OPEN
BACK : CLOSE
HOME ACTION SETUP
ACTION
: HOME
NUMBER
:
TIME
: 010 MIN
MODE
: OFF
IN PRESET : DISABLE
SAVE : OPEN
BACK : CLOSE
