KStar 10K-H, Руководство пользователя

Страница: 40 / 48

36
Item UPS Alarm Warning Buzz LED
31 Bypass over current Once per second BPS LED blinking
32 Overload Once per second INV or BPS blinking
33 No battery Once per second BATTERY blinking
34 Battery under voltage Once per second BATTERY blinking
35
Battery low
pre-warning
Once per second BATTERY blinking
36
Internal
Communication Error
Once per second Bypass LED lit
37
DC component over
limit.
Once per 2 seconds INV blinking
38 Parallel Overload Once per 2 seconds INV blinking
39 Mains volt. Abnormal Once per 2 seconds BATTERY LED lit
40 Mains freq. abnormal Once per 2 seconds BATTERY LED lit
41 Bypass Not Available BPS blinking
42
Bypass unable to
trace
BPS blinking
43 Inverter on invalid
NOTICE:
The following process must be performed if UPS is connected with
generator:
•
First turn on generator, after it runs stably connect output power
of generator to UPS input terminal, then turn on UPS. After UPS
turned on, please connect load one-by-one.
•
It is recommended that the generator capacity is as twice as UPS
rated capacity.