KStar 10K-H, Руководство пользователя

Страница: 34 / 48

30
4.3.8 Buzzer Mute Setting
Buzzers mute setting (Note
：
flashing part in dashed box)
Press ON under bypass voltage lower limit setting or press OFF under
the parallel ID setting can enter the buzzer setting. Now the setting status
is flashing as the Figure 14 shows (note: on=mute; off= no mute). When
press, it shows the mute cycle setting, the selection includes ON and OFF.
( Press the up button or down button can exit the mute setting (save the
mute setting status) and switch to bypass voltage lower limit setting or
parallel ID setting (note: when in stand-alone mode, press down button to
exit and save the settings, then the settings is completed for stand-alone
unit).