KStar 10K-H, Руководство пользователя

Страница: 33 / 48

29
4.3.7 Bypass Volt-Lo setting
Bypass voltage lower limit setting
(Note: Inside the broken-line is the flashing part.)
When under the bypass voltage upper limit setting press On▼
or when
under parallel ID setting press Off▲, it goes to the bypass lower limit
setting. The bypass lower limit line flashes as in above picture. (“-” for
negative, positive does not have any symbol.)
•
Use button Enter ( to set the different bypass voltage lower limit.
The bypass voltage lower limit range is 20%,30%,45%.
•
P
ress▲ or ▼ to exit the bypass voltage lower limit setting (save
the bypass voltage lower limit setting) and goes to bypass upper
limit setting or parallel ID setting.