KStar 10K-H, Руководство пользователя

Страница: 35 / 48

31
4.3.9 Parallel ID setting
Parallel ID setting
(Note: Inside the broken-line is the flashing part.)
When under the bypass voltage lower limit setting press On▼ or when
under parallel quantity setting press Off▲, it goes to the parallel ID setting.
The parallel ID flashes as in above picture.
•
Use button Enter

to set the different parallel ID. The parallel ID
range is 1~4.
•
P
ress▲ or ▼ to exit the parallel ID setting (save the parallel ID
setting) and goes to bypass lower limit setting or parallel quantity
setting.
NOTICE! Parallel cable cannot be connected when setting the parallel
parameters.