
11
3.3
UPS input and output connection
Minimum 10AWG copper wires are required for the 6KVA, and
8AWG for 10KVA,including input/output cables, battery cables.
1) Switch off all breakers before connecting cables
2) Remove the cover of the terminals, see Fig 2-3,following it to
connect the cables
Fig.3-3 I/O terminals connection
3) Connect the UPS output L, N, GND to L, N, GND of load via a
PDU. Tighten the screws and shelter the terminals
CAUTION!
Terminators are required so as to ensure the connections
are firm.
Don’t reverse the input L and N.
Don’t connect the UPS input to a wall outlet or the outlet
will get burnt.
Содержание 10K-H
Страница 2: ......
Страница 9: ...5 Fig 3 6KVA S Front Panel view Fig 4 6KVA S Rear Panel view See paragraph 4 2 1...
Страница 25: ...21 8 Alarm Code 9 Software version model 10 Bus voltage...