KSB Etabloc, Руководство по эксплуатации

Страница: 4 / 20

3
Etabloc
Section Page
Auxiliary connections 5.5.1 7
Checking the direction of rotation 5.7.3 8
Checks to be carried out prior to installation 5.2 6
Commissioning 6.1 8
Commissioning, start-up / shutdown 6 8
Connecting the piping 5.5 7
Connection to power supply 5.7 7
Contact guard 6.1.4 8
Density of medium handled 6.2.4 9
Description of the product and accessories 4 5
Design details 4.3 6
Designation 4.2 5
Dismantling 7.4 10
Drainage / disposal 7.3 10
Exploded view and list of components
Etabloc G
9.3 16
Exploded view and list of components
Etabloc G
9.2 15
Exploded view and list of components
Etabloc N
9.4 17
Final check 5.6/ 7/
6.1.3 8
Fundamental instructions and
recommendations 7.4.1
10
General 1 4
General instructions 7.1 9
Installation at site 5 6
Installing the pump set 5.4 6
Installation method 5.3 6
Interim storage / Preservation 3.2 5
Lubrication and lubricant change 7.2.2 9
Marking of instructions in the manual 2.1 4
Measures to be taken for prolonged shutdown 6.3.2 9
Mechanical seal 7.4.4/ 10/
7.5.2 11
Minimum flow 6.2.3 9
Motor connection 5.7.1 8
Motor for Etabloc N 7.5.3 11
Noise characteristics 4.4 6
Non-compliance with safety instructions 2.3 4
Operating limits 6.2 9
Ordering spare parts 7.6.1 12
Personnel qualification and training 2.2 4
Place of installation 5.4.1 6
Preparations for dismantling 7.4.2 10
Priming the pump and checks to be carried out 6.1.2 8
Pump 4.3.1/ 6/
7.4.3/ 10/
7.5.1 11
Reassembly 7.5 11
Recommended spare parts 7.6.2 13
Related documents 9 14
Returning to service after storage 6.4 8
Safety 2 4
Safety awareness 2.4 4
Section Page
Safety instructions for maintenance, inspection
and installation work
2.6 4
Safety instructions for the operator / user 2.5 4
Safety regulations 5.1 6
Servicing / inspection 7.2 9
Servicing / maintenance 7 9
Setting the time relay 5.7.2 8
Shaft seal 6.1.1 8
Shutdown 6.1.6 8
Shutdown / storage / preservation 6.3 9
Spare parts 7.6 12
Start-up 6.1.5 8
Storage of new pumps 6.3.1 9
Supervision of operation 7.2.1 9
Switching frequency 6.2.2 9
Technical specification 4.1 5
Temperature of the medium handled 6.2.1 9
Tightening torques 7.5.4 11
Transport 3.1 5
Transport and interim storage 3 5
Trouble-shooting 8 13
Typical installation positions 9.1 14
Unauthorized modes of operation 2.8 5
Unauthorized modification and manufacture of
spare parts
2.7 5
Vacuum balance line 5.5.2 7
Index