KSB Calio S, Инструкция по установке и эксплуатации

Страница: 38 / 52

7 Operation
38 of 52
Calio S
1157.8117/01-EN
Setting
Table 18: Activating and disabling Setback Operation
Step 1: Activating the setting mode
▪ Press and hold the control button ( ● ) for 3 seconds
– This will activate the display backlighting.
– The flashing symbol indicates the active operating mode.
Step 2: Selecting Setback Operation
▪ Press the control button ( ● ) for a minimum of 0.5 seconds until
the symbol for Setback Operation flashes.
Step 3: Enabling/disabling Setback Operation
▪
Enable or disable Setback Operation by pressing the control
buttons (+) or (-) respectively.
– 0 = Setback Operation disabled
– 1 = Setback Operation enabled
- Step 4: Saving the Setback Operation status
▪ Press and hold the control button ( ● ) for a minimum of 3
seconds.
– The set status flashes and is saved.
– When the status has been saved successfully, the symbol
"nd" (night derating) is shown on the display.