KSB Calio S, Инструкция по установке и эксплуатации

Страница: 24 / 52

5 Installation at Site
24 of 52
Calio S
1157.8117/01-EN
Fig. 6: Use of the straight plug housing with the electronic system housing (control
panel) is turned by 90 degrees
8. Slide the contact insert into the plug housing until you can hear it engage.
Make sure the projection is positioned correctly.
1
“Clic
k“
Fig. 7: Fastening the contact insert to the plug housing
1 Projection
9. Screw the union nut and joint ring onto the thread at the plug housing.
Tightening torque = 1 Nm
10. Connect the plug-type connector at the pump set.