✓
The submersible mixer is mounted on the installation set and located
completely outside the fluid handled.
If tank is filled: Mixer mounted on the guide rail and suspended from lifting
gear.
If tank is empty: Mixer mounted on the guide rail and in operating position.
✓
The submersible mixer is connected to the power supply.
1.
Start the submersible mixer and stop it again immediately to determine the
direction of rotation.
2.
Check the direction of rotation.
Propeller rotation must be anti-clockwise (looking at the propeller hub). (See
rotation arrow on the housing)
3.
If the mixer is running in the wrong direction of rotation, check the electrical
connection of the mixer and the control system, if necessary.
4.
Lower the submersible mixer into its operating position.
Fig. 6: Checking the
direction of rotation
5 Installation at Site
Amamix
23 of 54
