KSB Amamix series Скачать руководство пользователя

Страница: 10 / 54

3 Transport/Temporary Storage/Disposal

3.1 Checking the condition upon delivery

On transfer of goods, check each packaging unit for damage.

In the event of in-transit damage, assess the exact damage, document it and

notify KSB about the damage in writing immediately.

3.2 Transport

DANGER

Improper transport
Danger to life from falling parts!

Damage to the submersible mixer!

▷

Use the attachment point provided (lifting lug or bail) for attaching lifting
accessories.

▷

Never suspend the submersible mixer by its power cable.

▷

Never use the lifting ropes included in KSB's scope of supply for lifting loads

other than the KSB product supplied.

▷

Safely attach lifting ropes to the submersible mixer and crane.

▷

Protect the power cable against damage.

▷

Maintain adequate safety distance during lifting operations.

WARNING

Submersible mixer tipping over or rolling off
Risk of personal injury!

▷

Secure the submersible mixer against tipping over or rolling off.

WARNING

Temporary storage on unsecured and uneven surfaces
Personal injury and damage to property!

▷

Place the submersible mixer on level firm ground only.

▷

Refer to the weights given in the data sheet/on the name plate.

Transport the submersible mixer as shown.

Transport with supporting clamp

Transport with supporting strap

Transport with lifting bail

3.3 Storage/Preservation

If commissioning is to take place some time after delivery, we recommend that the
following measures be taken for storage:

3 Transport/Temporary Storage/Disposal

10 of 54

Amamix

Содержание Amamix series























































Результаты поиска

Содержание Amamix series

Отзывы:

Похожие инструкции для Amamix series

Бренды по названию

Популярные бренды

KSB Amamix series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Amamix series

Отзывы:

Похожие инструкции для Amamix series

Бренды по названию

Популярные бренды