KSB Amamix series, Инструкция по установке и эксплуатации

Страница: 7 / 54

2 Safety
All the information contained in this section refers to hazardous situations.
2.1 Key to safety symbols/markings
Table 3: Definition of safety symbols/markings
Symbol Description
!
DANGER
DANGER
This signal word indicates a high-risk hazard which, if not avoided,
will result in death or serious injury.
!
WARNING
WARNING
This signal word indicates a medium-risk hazard which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION
This signal word indicates a hazard which, if not avoided, could
result in damage to the machine and its functions.
General hazard
In conjunction with one of the signal words this symbol indicates a
hazard which will or could result in death or serious injury.
Electrical hazard
In conjunction with one of the signal words this symbol indicates a
hazard involving electrical voltage and identifies information about
protection against electrical voltage.
Machine damage
In conjunction with the signal word CAUTION this symbol indicates
a hazard for the machine and its functions.
2.2 General
This manual contains general installation, operating and maintenance instructions
that must be observed to ensure safe operation of the submersible mixer and prevent
personal injury and damage to property.
The safety information in all sections of this manual must be complied with.
This manual must be read and completely understood by the responsible specialist
personnel/operators prior to installation and commissioning.
The contents of this manual must be available to the specialist personnel at the site
at all times.
Information attached directly to the submersible mixer must always be complied
with. This applies to, for example:
▪
Arrow indicating the direction of rotation
▪
Markings for connections
▪
Name plate
The operator is responsible for ensuring compliance with all local regulations which
are not taken into account in this manual.
2.3 Intended use
The submersible mixer must only be operated within the operating limits described in
the other applicable documents.
▪
Only operate submersible mixers which are in perfect technical condition.
▪
Do not operate partially assembled submersible mixers.
▪
Only use the submersible mixer in the fluid described in the data sheet or
product literature.
▪
Never operate the submersible mixer without fluid.
▪
Observe the minimum fluid levels indicated in the data sheet or product
literature (to prevent overheating, bearing damage, cavitation damage, etc.).
!
DANGER
2 Safety
Amamix
7 of 54