35
Unloading
1.1 With manually operated tailgate (Fig. 1)
Push lever (1) downwards; this lifts the locking hooks
on the left and right and unlocks the tailgate (see Fig.)
The rear part of the tailgate can now swing freely. The
entire tailgate is lifted using the hand lever (3) and can
be fixed in the holes A or B using the fixing bracket (2)
.
With manually operated tailgate, ensure
that the hand lever is always located on the
inside behind the mount (4).
Fig. 2
Fig. 1
1.2 With hydraulically operated tailgate (Fig. 2)
The tailgate can be opened hydraulically from the
tractor. Operate the switch until the tailgate is
completely open.
2. Use the hydraulic articulated drawbar before driving
over horizontal silos. Only extend as far as required.
When driving down from horizontal silo, retract
accordingly.
3. Switch on advance.
4. Load can be unloaded across full wagon width at
required advance speed.
5. Always drive forward sufficiently when unloading
to allow the load to fall freely. This prevents
overloading of the floor conveyor.
6. Close tailgate.
