manualshive.com logo in svg

Krone EasyCut F 280, Оригинальная инструкция по эксплуатации, Страница: 85 / 96

Поделиться
Скачать
Krone EasyCut F 280 Скачать руководство пользователя страница 85

 

Before the Start of the New Season

 

85 

 

Pos: 141.4 /Ü berschriften/Ü berschriften 1/U-Z/Vor Beginn der neuen Saison @ 4\mod_1211272647559_78.docx @ 82867 @ 1 @ 1 

 

16 

Before the Start of the New Season  

Pos: 141.5 /Ü berschriften/Ü berschriften 2/P-T/SSpezi elle Sicher heitshi nweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1 

 

16.1 

 Special Safety Instructions 

Pos: 141.6 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/War nung - R eparatur _Wartung_R einigungs_4 allgemei n EasyCut @ 292\mod_1410941423112_78.docx @ 2299026 @  @ 1 

 

 

WARNING! 

When performing repair, maintenance or cleaning work or in case of technical 

intervention, drive elements may start moving (caution: cutting discs continue to run). 

Effect: Danger to life, injuries or damage to the machine. 
•  Turn off the PTO shaft. 
•  Move the machine to the working position and lower it to the ground. 
•  Switch off the engine of the tractor, remove the ignition key and carry it with you. 
•  Secure the tractor against accidental start-up and against rolling. 
•  After the repair, maintenance, cleaning work or technical modifications are completed, 

mount all protective covers and safety devices properly again. 

•  Avoid skin contact with oils, greases, cleaning agents and solvents. 
•  In the event of injuries or burns due to oils, cleaning agents or solvents, contact a physician 

immediately. 

•  All other safety instructions must also be followed to avoid injuries and accidents. 

 

Pos: 141.7 /Ü berschriften/Ü berschriften 2/P-T/PProbelauf @ 0\mod_1196782963921_78.docx @ 14908 @ 2 @ 1 

 

16.2 

Test run.  

Pos: 141.8 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/Gefahr - Pr obel auf Ei nzahl M ähwer k muss auf Boden aufliegen @ 11\mod_1223615241207_78.docx @ 148217 @  @ 1 

 

 

Danger! - Testing the machine after repair, maintenance or cleaning work and after 

technical intervention. 

Effect: Danger to life or serious injuries 
•  The mowing unit must be in working position 
•  Do not switch on the drives until the mowing unit is resting on the ground and you are 

absolutely sure that neither persons, animals nor objects are in the danger zone. 

•  Start a trial run of the machine only from the driver’s seat. 

 

Pos: 141.9 /BA/Ei nlag erung/EasyC ut / AM M ähwer ke/Vor der Saison ohne Ber eifung @ 3\mod_1204731533226_78.docx @ 72767 @  @ 1 

 

•  Lubricate the machine thoroughly. Remove any condensation water which may have 

collected in the bearings.

•  Check oil level in the gearbox(es) and top up if necessary. 
•  Check all screws to make certain they are tight or retighten them if necessary. 
•  Check all electrical connection cables and the lighting. Repair or replace if necessary. 
•  Check the entire setting of the machine and correct if necessary. 
•  Re-read the operating instructions thoroughly.

 

Note 

Use vegetable oils and greases. 

 

Pos: 141.10 /BA/Ei nlager ung/R eibkupplung/Rei bkupplung lüften vor  der Saison @ 3\mod_1204731645242_78.docx @ 72787 @  @ 1 

•  Vent the friction clutch to release the adhesion of the friction lining.

Pos: 141.11 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание EasyCut F 280

































































































Отзывы:

Нет отзывов