manualshive.com logo in svg

Krone EasyCut F 280, Оригинальная инструкция по эксплуатации, Страница: 54 / 96

Поделиться
Скачать
Krone EasyCut F 280 Скачать руководство пользователя страница 54

Maintenance

 

 

54 

 

Pos: 102 /Überschriften/Ü berschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1 

 

11 

Maintenance  

Pos: 103.1 /Ü berschriften/Ü berschriften 2/P-T/SSpezi elle Sicher heitshi nweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1 

 

11.1 

 Special Safety Instructions 

Pos: 103.2 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/Gefahr - Unvor hergesehene Akti onen an der Maschi ne_1 @ 0\mod_1196782315875_78.docx @ 14851 @  @ 1 

 

 

Danger! - Unexpected actions on the machine 

Effect: Danger to life, injuries or damage to the machine. 
•  Always make certain that the drive and the engine are switched off before doing any 

repairs, maintenance or cleaning. 

•  The cutting discs continue to run! 
•  Switch off the engine and remove the ignition key. 
•  Secure the machine against accidental start-up and against rolling! 

 

Pos: 103.3 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/G efahr - Bei unr egel mäßiger Kontroll e der M esser kling en und Hal tebolzen @ 0\mod_1196782406281_78.docx @ 14870 @  @ 1 

 

 

Danger! - When checking the cutter blades and retaining bolts only sporadically 

Effect: Danger to life, injuries or damage to the machine. 
•  Always check the mowing units for damaged, missing or worn blades, retaining bolts, leaf 

springs and cutting discs/blade drum before starting operation; replace any parts that are 

damaged, missing or worn! 

•  Always replace missing and damaged blades in sets to prevent unbalanced rotation! 
•  Never mount unevenly worn blades on a drum/disc! 
•  Whenever a blade is changed, also inspect the fasteners and replace them, if necessary! 

 

Pos: 103.4 /Ü berschriften/Ü berschriften 3/P-T/PProbelauf @ 0\mod_1196833698843_78.docx @ 15023 @ 3 @ 1 

 

11.1.1 

Test run  

Pos: 103.5 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/Gefahr - Pr obel auf Ei nzahl M ähwer k muss auf Boden aufliegen @ 11\mod_1223615241207_78.docx @ 148217 @  @ 1 

 

 

Danger! - Testing the machine after repair, maintenance or cleaning work and after 

technical intervention. 

Effect: Danger to life or serious injuries 
•  The mowing unit must be in working position 
•  Do not switch on the drives until the mowing unit is resting on the ground and you are 

absolutely sure that neither persons, animals nor objects are in the danger zone. 

•  Start a trial run of the machine only from the driver’s seat. 

 

Pos: 103.6 /Ü berschriften/Ü berschriften 2/A-E/EErsatzteile @ 0\mod_1196782991234_78.docx @ 14927 @ 2 @ 1 

 

11.2 

Spare Parts  

Pos: 103.7 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/WARNUN G - Verwendung von nicht zugel assenen Ersatzteil en @ 308\mod_1417011577394_78.docx @ 2392925 @  @ 1 

 

 

Warning! - Using non-approved spare parts. 

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability 
•  Use only authentic KRONE spare parts and accessories authorised by the manufacturer. 

The use of spare parts, accessories or additional equipment not manufactured, tested or 

approved by KRONE will exclude any liability for consequential damage. 

 

Pos: 103.8 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание EasyCut F 280

































































































Отзывы:

Нет отзывов