Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 72 / 120

IV - 6
Info Centre
4.2 Settings
4.2.1 Working Width
The working width must be set in order to be able to
calculate the surface.
In grass pickup mode, the symbol and the set
width (swathed width) is displayed in the information
section settings (IV) in cm or inches.
In maize header mode, the settings (IV) information
section displays the symbol and the number
of rows set with the resulting working width in cm or
inches.
In Direct cutting system mode, the symbol
and the set width are displayed in the information
section settings (IV) in cm or inches.
4.2.2 Temporary change in the working
width of the grass pickup
Working width = swathed width
• Pressing the
1
key decreases the working width;
if the
1
key is held down for a longer time, the
working width will decrease faster.
• Pressing the
2
key increases the working width
(up to the maximum for the fixed set width). If the
2
key is held down for a longer time, the working
width will increase faster.
It is also possible to make a setting with the rotary
potentiometer:
• You can use the rotary potentiometer to select the
setting for the working width. The input field is
highlighted in colour.
• Pressing the rotary potentiometer allows you to
jump to the input field.
• You can adjust the desired working width with the
rotary potentiometer (up to a maximum for the fixed
set width).
• To exit the input field again, press the rotary
potentiometer.
Activating the key on the multifunction
lever ((7) = raise lifting gear up to top)
causes the system to switch back to
the permanently set working width.
1 2
3 4
5 6
7 8
A B C D
BX500005_1
II
III
V
I
7
BX500500
https://tractormanualz.com