manualshive.com logo in svg

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 13 / 120

Поделиться
Скачать
Krone BiG X 1000 Скачать руководство пользователя страница 13

General Aspects

I - 1

1

General Aspects

These operating instructions contain fundamental
instructions. These must be observed in operation and
maintenance. For this reason, these operating
instructions must be read by operating personnel
before commissioning and use, and must be available
for easy reference.

Follow both the general safety instructions contained in
the section on safety and the specific safety
instructions contained in the other sections.

1.1 Purpose

The self-propelled forage harvester BiG X is used to
harvest and chop blades and leaves, maize and similar
crops, when provided with front attachments in the
works of the manufacturer.

1.2 Information on the product

1.2.1 General Aspects

These operating instructions are valid for the self-
propelled forage harvester BiG X.

1.2.2 Address of the manufacturer:

Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10
D-48480 Spelle (Germany)
Telephone: 0 59 77/935-0
Fax: 0 59 77/935-339
E-mail: [email protected]

1.2.3 Declaration

EC declaration of conformity corresponding to the EC
directive
See reverse side of title page

1.2.4 Designation

Vehicle identification plate

The machine data are rendered on a type plate (1),
which is located on right front side of the machine.

Type

Year of
construction

Vehicle ID No.

The entire identification plate
represents a legal document and
should not be altered or rendered
illegible!

Tank cover
key number

1

BX500067

Maschinenfabrik Bernard KRONE GmbH

Heinrich-Krone-Straße 10
D-48480 Spelle

Typ

Fahrzeugident-Nr.:

Zul.Gesamtgewicht:

Zul.Achslast vorn:

Zul.Achslast hinten

Made in Germany

https://tractormanualz.com

Содержание BiG X 1000

























































































































Отзывы:

Нет отзывов