Krone BiG X 1000 Скачать руководство пользователя страница 54

Страница: 54 / 120

III - 6

Operators controls

3.2.11 Engine failure indicator light

The engine pilot lamp (I) (1) lights up as soon as a
failure in the engine (I) is detected..

Switch the engine off immediately.
Rectify the fault.

The engine pilot lamp (II) (3) lights up as soon as a
failure in the second engine is detected.
(Only for BiG X 800 and BiG X 1000)

Switch the engine off immediately.
Rectify the fault.

3.2.12 Charge indicator light

The charge indicator light (2) will light up, if the output
voltage of the three-phase generator is not sufficient
to charge the batteries.

• Check the cables and connections on the three-

phase generator and on the batteries. Check the
V- belt on the three-phase generator.

BX500033

BiG X 500, BiG X 650

BiG X 800, BiG X 1000

BX500101

https://tractormanualz.com

Содержание BiG X 1000

























































































































Результаты поиска

Содержание BiG X 1000

Отзывы:

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 54 / 120

Результаты поиска

Содержание BiG X 1000

Отзывы: