Krone BiG X 1000 Скачать руководство пользователя страница 100

Страница: 100 / 120

Info Centre

IV - 34

• To stop the process temporarily, press the

key

next to the

softkey.

• To apply the default setting values, press the

key next to the

softkey.

• To jump back to the screen that was previously

displayed, press the

key next to the

softkey.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

For additional information on the
individual parameters, please refer to
the parameter list in the appendix
entitled „Parameter list“.

Entering parameters

• You can use the rotary potentiometer to select

individual parameters. The input field is highlighted
in light blue.

Only input fields with a light blue
background can be changed.

• Pressing the rotary potentiometer allows you to

jump to the input field.
The mask for parameter entry appears with the
following displays:

(1) Shows the designation of the selected
parameter.

(2) Visual display of the possible range of the
parameter value.

(3) Parameter data: (from top to bottom) parameter
number, min. value, max. value, default setting
value, unit.

(4) Actual value of the parameter. 99999 means the
corresponding control unit is offline.

• Enter the new setpoint value in the input field (5)

with the rotary potentiometer or keyboard (7).

• You can reset to the default setting value in the

input field (6) (non-locking function).

• To delete the setpoint value, press the

key.

• To accept the modified value and/or parameter input

mask, press the

key.

BX750018

BX500147

BX500147_1

https://tractormanualz.com

Содержание BiG X 1000

























































































































Результаты поиска

Содержание BiG X 1000

Отзывы:

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 100 / 120

Результаты поиска

Содержание BiG X 1000

Отзывы: