Krone BiG X 1000 Скачать руководство пользователя страница 62

Страница: 62 / 120

III - 14

Operators controls

3.6.1 Steering column adjustment

Adjust the steering column only when
the machine is at a standstill.

Horizontal and vertical steering column adjustment

The steering column (1) is held in
vertical position by spring pressure.
Before actuating the pedal (2), hold the
steering wheel with both hands.

• Use the pedal (2) to release the steering column (1),

and adjust to the desired position. After the pedal
(2) has been released, the steering column (1) will
be locked.

Horizontal steering column adjustment

• Loosen release lever (3). Move the steering column

(1) into the requested position. Lock the release
lever (3) again.

3.6.2 Horn

• When the push-button (1) is pressed, the horn is

sounded.

3.6.3 Indicator switch

In road traffic the change of travelling
direction is indicated by a flashing
light.

• Switch (1) forward – right indicator

• Switch (1) backward – left indicator

• Set the switch to neutral position by hand.

The indicator pilot lamp (2) will light up when the
indicator has been switched on.

BX100300

BX100210

BX100213

https://tractormanualz.com

Содержание BiG X 1000

























































































































Результаты поиска

Содержание BiG X 1000

Отзывы:

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 62 / 120

Результаты поиска

Содержание BiG X 1000

Отзывы: